Used 2001 jeep wrangler for sale in dallas, GA

Hi , i have a 2001 jeep wrangler sport 4.6 stroker 5 speed for sale

list of mods
ENGINE

Brand new 500 miles 4.6
scat steel crank
king main and rod bearings
forged 4340 scat rods (6.125) with arp 2000 bolts
icon forged stroker pistons with hasting moly rings gapped at .023 and .025 (mild boost friendly)
block decked .010 to improve quench
331 TUPY head rebuilt and milled .010
block hot tanked cam bearings line honed (for arp main studs)
bored .030 with torque plate hone (for arp head studs)
oil return holes ported for better oil return
new brass freeze plugs
felpro mls gasket .043
arp main and head studs (not needed for the power level but i over build shit)
stage 1 howards cam and lifters
24# ford injectors (to compensate for increased displacement)
new pushrods rockers and stands
new water pump
new balancer
new mellings oil pump
new 3 core aluminum radiator
i used the trans cooler in the radiator (as you don't need it for a manual)
for a large power steering cooler
new durango steering box
steering box skid plate
new steering lines
SUSPENSION & DRIVETRAIN

terraflex long arm with 3" springs
terraflex shocks
front sway bar disconnect
(rear sway is deleted by the terraflex kit)
braided longer brake lines
air lockers front and rear
rubicon dana 44's front and rear
slip yoke eliminator
im pretty sure the tcase has a 4to1 low kit but i can not confirm)
4 wheel disk brake conversion
35" nittos (about 1000 miles on them)
4.10 gears
new LUK heavy duty flywheel clutch pressure plate throw out bearing
shift fork and pivot ball.
welded on very functional rock sliders

INSIDE

brand new heater core and ac evap core
heat and ac work beautifully
almost all the ac is new
custom storage box for gear and side windows that replaces the back seat
the storage box includes a divorced compartment with a l7 solobaric sub woofer
i have the rear seat as well if you would like to reinstall it (may need a few bolts)
i insulated the rear floor under the carpet while i had it all out to reduce road noise and keep heat in in the winter
new ignition switch
new ecu (had an issue with the skim safety key crap so i had it deleted out of the ecu)
seats are worn as you would expect nothing seat covers wont fix
the rest of the interior is in good shape (what interior a jeep has anyway)
trans works well as it should

BODY
180xxx miles

first i will say, it is no show pig
it has been used it has fading in the pain and scratches the spare tire was hit at some point as there is a bend in the door
it also isnt beat to shit it has zero rust
it has 2 led light pods on the a pillar
a 3 piece light bar on the cowl (mounted low to avoid the dreaded wind noise)
brand new badlands 12k winch like a week old never been used (jeep is very capable and doesnt really need it)
i have a synthetic winch rope off of the old warn that was on it (needs relays) if you prefer that to the cable you can swap them out
top is in great shape
really all this jeep needs is for someone to put their own touches on it. all of the expensive hard parts are done

the reason im selling this is two fold
im buying a house next year and saving for that
and i bought the jeep to go wheeling with a friend that had just bought a jeep and found out he had cancer
he has unfortunately passed on and ive lost interest in keeping it for that reason.

im not in any way hurting for money nor do i need the space its sitting in. i have no nagging wife telling me to sell it, so low ball offers wont get you very far (doesn't offend me it just waste your time) also i do have receipts for every part ive installed including the engine build that will come with the jeep

trades. im not really looking for trades that being said i am obviously a gear head. and you might have something i didnt know i wanted. so it doesnt hurt to offer.

thanks and have a blessed day